fbpx
Sale!

Swim Spa LOTUS 18318 with Counter-Flow

29,900.00 25,900.00

.

SKU: 5-18318 Category:

Description

PRODUCT DESCRIPTION:
Size 5900x2280x1520cm
Temperature range: 15 ° C ~ 42 ° C
Number of seats: 5 people (including 1 lying)
Headrests: 5
Air jets: 12
Water jets: 21 including:
– Water jets (3.5 ”): 2 swivel
– Water jets (4.5 “): 16 (including 9 rotating)
– Water jets (5 “): 3 (including 2 rotating)
Acrylic recessed jets: yes
Optical fibres: yes. 15 (7 kinds of colours)
SPA light: 1 (7 kinds of colours)
Granite waterfall: yes – lights on 7 types Colors
Illuminated outer casing: yes
Drain valve: 1
Suction valve: 4
Water pump 2HP / 1.5kW: 2
Circulation pump 0.35HP / 0.25kW: 1
0.7kW air pump: 1
Ozone generator: yes
3 KW heater: 1 
Water filter: 1
Control panel: yes
Waterfall valve: yes
Granite corners: 4

SWIMMING POOL:
Temperature range: 15 ° C ~ 35 ° C
Stainless steel construction: yes
Control panel: yes
Jets with counter-currents: 3 JET
3HP / 2.25kW water pump: 3
2HP / 1.5kW water pump: 1
Circulation pump 0.35HP / 0.25kW: 1
Ozone generator: yes
3 KW heater: 1
SPA light: 1 (7 kinds of colours)
Optical fibres: yes. 50 (7 kinds of colours)
Water filter: 2
Drain valve: 1
Suction valve: 8

*Double insulation included

*Thermal cover for entire pool included

ADDITIONAL OPTIONS:
* UV lamp: €500 (for a swim spa, it is best to install two UV lamps – one for the spa area and one for the pool)
* Lifter/Stand for the thermal cover: €300 (for swim spas two lifts are recommended)
* Handrail for easy access to the pool: €180
* Balboa Touch ST3 panel: €500
* Balboa Wi-Fi module: €500

 

 

……………………………………………………………………………………..

-All pools are made of high-quality acrylic, which is resistant to weather conditions and UV rays. The pools are constructed of stainless steel. Controllers carry out daily filtration and maintain the set temperature. The equipment includes cartridge filters and an ozone generator for water disinfection. There is also an option to build in a UV lamp and a sand filter.

-The pools are adapted for use indoors and outdoors, in summer and winter, thanks to the thermal coating and full insulation of the bottom of the basin and the casing. The hot water is kept at the level of electricity costs consumption over a long period of time. Illuminated handrails or water poles add to the exercise for the whole exerciser.

-All you need to install immersion floors is a level, hardened base and two power cables. Pools received different lengths, which gives a lot of room for manoeuvre, are located in small gardens.
The BALBOA panel supports all bathtub functions and in the start-up sign, starting from pumps, ozone system, lighting and heater. A company from the USA produces quality parts for SPA bathtubs, including the controller, which is a failure-free and vandal-proof connector. The controller has two independent water heating modes, i.e. so that you can manipulate the water temperature in a traditional way depending on your needs. After programming the appropriate filtration cycle, it cycles the circulation pump, which passes the water through the filters and disinfects it.

-The BALBOA controller can be extended with a WiFi module that allows you to control the bathtub using your phone application.

-Our bathtubs and swimming pools are equipped with a 3000 W instantaneous water heater. Thanks to it, you can raise the temperature of the water and keep it at a high level. The heater is an indispensable device when using the SPA.
The jets in the bathtub it was built with chrome. You do not have to worry that the jets will become covered with limescale. Take advantage of water tools, where every installation of water tools for installing water systems is to use the water system refilling tool. A knob can smoothly adjust the aeration.

-The ozone generator is a special program that sterilizes the water so that both the bathtub/swimming pool and the water will be clean. It is a new and fast way to remove bacteria, algae etc., the water does not need to be changed even up to 6 months.

-It is possible to install a UV lamp for water treatment in SPA tubs and swimming pools. As sterilizers, they remove harmful substances from the liquid and eliminate viruses and bacteria. Thanks to their use, you can get exceptionally clean water. The properties of UV lamps for water make them applicable wherever it is necessary to use a clean liquid. The combination of a lamp and an ozone generator gives a system that does not require the use of chemicals to maintain clean water in the SPA.

-Most of the water jets can be plugged, which allows you to manipulate which parts to massage freely and with some force. The jets found in SPA tubs are rotating, directional and point-like.
The complete insulation of SPA bathtubs is made of polyurethane foam, the entire basin of the bathtub is covered with a thickness of about 15mm to 30mm, the casing and the bottom are about 10mm to 15mm, with heat losses, thanks to which the power consumption of the heater is limited.

-The housing is made of high-quality, weather-resistant material. Sunlight does not discolour the colour of the housing. We have a different range of colours that can be selected from the available template.

-The bottom is made of polymer and has been completely cast. Design board so that it creates insulation from the side, moisture and weather conditions. Bottom, casing, and full insulation Option something like a thermos, heat transfer last a very long time, which results in low electricity consumption.

Insulation standards for outdoor bathtubs:

The insulation of the polyurethane foam basin is approximately 15 to 30 mm thick.

The casing frame is made of wood, with high-quality casing (30mm insulation thickness on the casing elements). The whole Housing and the bottom are insulated with polyurethane foam with a thickness of about 10-15 mm.

Pumps and heater give heat to the bathtub and reduce the amount of heat given off by the basin, which reduces electricity consumption.

Insulating the bottom of the bathtub with polyurethane foam is more efficient and gives less heat to the atmosphere than foam with a thermal insulation foil available from competitors. Foam with a thermal insulation foil will not fill all gaps, as in polyurethane foam, which will tightly fill every free space, thanks to which the heat of the water does not escape from the basin.
Colour therapy is an unconventional treatment method that exposes a person’s sense of sight to the appropriate colours that soothe, relax or stimulate. When different colours surround you, you can have more energy and optimism.
The ozone generator is a special program that sterilizes the water so that both the bathtub/swimming pool and the water will be clean. It is a new and fast way to remove bacteria, algae etc., the water does not need to be changed even up to 6 months.

CE- This Cert means that this product conforms with the essential requirements of the applicable EC Directives
TUV – Technical Approval of Independent Certification Body
Cleaning system – OZONE DISINFECTION built-in!
Fast Delivery!! Only Brand New Products! 24 months parts warranty guaranteed!
Only with us, you have 100% sure that the equipment described below will 100% agree with the actual condition of delivered to you swim spa.
NATIONWIDE INSTALLATION SERVICE AVAILABLE, FULL PROFESSIONALISM IN CONSULTING AND REMOVING ANY FAULTS.

Reviews

There are no reviews yet.

Be the first to review “Swim Spa LOTUS 18318 with Counter-Flow”

Your email address will not be published. Required fields are marked *

X