Swim Spa LUNA 18188 with Counter-Flow

31,900.00 26,900.00


SKU: 5-18188 Category:


Size: 5900x2220x1360 / 1500mm
White color
Number of seats: 6 people
Power supply: 380V / 50Hz or 230V / 50Hz
Coating: USA acrylic

Temperature: 15 ° C ~ 42 ° C
Stainless steel construction: yes
Headrest: 3
LED air jets: 12
Water jets: 61:
– Water jets (2.2 “): 45 (including 22 rotating)
– Water jets (2.5 “): 2 (including 2 rotating)
– Water jets (3.5 ”): 8
– Water jets (4.5 “): 5 (including 3 rotating)
– Water jets (5 “): 1
Fibre optic lights: 31 (7 kinds of colours)
SPA light: 1 (7 kinds of colours)
Drain valve: 1
Inlet valve: 3
3HP / 2.25kW water pump: 2
Circulation pump 1HP / 0.75kW: 1
0.7kW air pump: 1
Ozone system: yes
3 KW heater: 1 
Filter Cartridge: 1
Control panel: yes
Ventilation valves: 2 Easy-Flow Air Venturi

Temperature: 15 ° C ~ 35 ° C
Stainless steel construction: yes
LED Air jets: 8 
9.5 ”counter-flow jets: 3 JET
Water jets: 15:
– Water jets (2.2 “): 2
– Water jets (2.5 “): 5 (including 5 rotating)
– Water jets (3.5 “): 4 (including 2 revs)
– Water jets (4.5 “): 3 (including 2 revs)
– Water jets (5 “): 1
BALBOA control panel: yes
SPA light: 2 (7 kinds of colors)
Fiber optic lights: 77 (7 colors)
Drain valve: 2
Inlet valve: 7
Aeration valves: 4 Easy-Flow Air Venturi
3HP / 2.25kW swimming pump: 3
Water pump 2HP / 1.50kW: 1
Circulation pump 1HP / 0.75kW: 1
Ozone system: yes
3 KW heater: 1 
Cartridge Filter: 2



*Double insulation: €1,500

*Thermal cover for the entire pool: €1,200

* UV lamp: €500 (for a swim spa, it is best to install two UV lamps – one for the spa area and one for the pool)
* Lifter/Stand for the thermal cover: €300 (for swim spas, two lifts are recommended)
* Handrail for easy access to the pool: €180
* Balboa Touch ST3 panel: 500, –
* Balboa Wi-Fi module: 500, –

-Swim Spa LUNA 18188 has two independent zones; the first is a swimming pool, the second is a SPA bath with hydro-massage. The zones work separately; they have separate electronics and water. The statutory temperature is individual for each zone separately.
-All pools are made of high-quality acrylic, which is resistant to weather conditions and UV rays. The pools are constructed of stainless steel. Basins and housing in many colors, the customer can individually order a color. Controllers carry out daily filtration and maintain the set temperature. The equipment includes cartridge filters and an ozone generator for water disinfection. There is also an option to build in a UV lamp and a sand filter.

-The pools are adapted for use indoors and outdoors, in summer and winter. Thanks to the thermal coating and full insulation of the bottom of the basin and the casing, the hot water is kept at the electricity consumption costs over a long time. Illuminated handrails or water poles add to the exercise for the whole exerciser.

-All you need to install immersion floors is a level, hardened base, and two power cables. Pools received different lengths, which give a lot of room for man-oeuvre, are located in small gardens.
The BALBOA panel supports all bathtub functions and the start-up sign, starting from pumps, ozone system, lighting, and heater. A company from the USA produces quality parts for SPA bathtubs, including the controller, a failure-free and vandal-proof connector. The controller has two independent water heating modes, i.e., so that you can manipulate the water temperature in a traditional way depending on your needs. After programming the appropriate filtration cycle, it cycles the circulation pump, which passes the water through the filters and disinfects it.

-The BALBOA controller can be upgraded with a WiFi module that allows you to control the bathtub using your phone application.

-Our bathtubs and swimming pools are equipped with a 3000 W instantaneous water heater. Thanks to it, you can raise the water temperature and keep it at a high level. The heater is an indispensable device when using the SPA.
The jets in the bathtub it was built with chrome. You do not have to worry that the jets will become covered with limescale. Take advantage of water tools, where every installation of water tools for installing water systems is to use the water system refilling tool. A knob can smoothly adjust the aeration.

-Most of the water jets can be plugged, which allows you to manipulate which parts to massage freely and with what force. The jets found in SPA tubs are rotating, directional, and point-like.
The complete insulation of SPA bathtubs is made of polyurethane foam, the entire basin of the bathtub is covered with a thickness of about 15mm to 30mm, the casing and the bottom are about 10mm to 15mm, to heat losses, thanks to which the power consumption of the heater is limited.

-The housing is made of high-quality, weather-resistant material. Sunlight does not discolor the color of the housing. We have a different range of colors that can be select from the available template.

-The bottom is made of polymer and has been completely cast. Design board so that it creates insulation from the side, moisture, and weather conditions. Bottom, casing, and full insulation Option something like a thermos, heat transfer last a very long time, which results in low electricity consumption.

Insulation standards for outdoor bathtubs:

-The insulation of the polyurethane foam basin is approximately 15 to 30 mm thick.

-The casing frame is made of wood, with a high-quality casing (30mm insulation thickness on the casing elements). The whole Housing and the bottom are insulated with polyurethane foam with a thickness of about 10-15 mm.
-A thermal image was taken in winter at a temperature of about -6oC. The bathtub is flooded with water, ready to use; the external temperature of the casing and coverage is around 0oC. This proves low heat loss.

-Pumps and heater give heat to the bathtub and reduce the amount of heat given off by the basin, which reduces electricity consumption.

-Insulating the bottom of the bathtub with polyurethane foam is more efficient and gives less heat to the atmosphere than foam with a thermal insulation foil available from competitors. Foam with a thermal insulation foil will not fill all gaps, as in polyurethane foam, which will tightly fill every free space, thanks to which the heat of the water does not escape from the basin.
-Color therapy is an unconventional treatment method that exposes a person’s sense of sight to the appropriate colors that soothe, relax or stimulate. When different colors surround you, you can have more energy and optimism.
-The ozone generator is a special program that sterilizes the water so that both the bathtub/swimming pool and the water will be clean. It is a new and fast way to remove bacteria, algae, etc., the water does not need to be changed even up to 6 months.



CE- This Cert means that this product conforms with the essential requirements of the applicable EC Directives
TUV – Technical Approval of Independent Certification Body
Cleaning system – OZONE DISINFECTION built-in!
Fast Delivery!! Only Brand New Products! 24 months parts warranty guaranteed!
Only with us, you have 100% sure that the equipment described below will 100% agree with the actual condition delivered to your swim spa.



There are no reviews yet.

Be the first to review “Swim Spa LUNA 18188 with Counter-Flow”

Your email address will not be published. Required fields are marked *

    Your Cart
    Your cart is emptyReturn to Shop